Getting the size right is the whole job when you order a storm door. Here is how we ask customers to measure, and how to tell whether a standard size will work or you need a custom door.
Step 1: Measure the opening width. Measure inside the door frame, from one side of the trim/brickmould to the other, at the top, middle, and bottom. Use the smallest of the three numbers — older frames are rarely perfectly square.
Step 2: Measure the opening height. Measure from the top of the frame down to the top of the threshold or sill, on both sides. Use the smaller number.
Step 3: Check the mounting surface. A storm door mounts to the exterior trim around your entry door. You need a flat, solid surface of at least about 1 inch all the way around for the door frame to seat against.
Standard or custom? Our Chippendale wooden storm doors come in standard 36×80 and 32×80 sizes, which cover most modern homes. Go custom if:
- Your opening measurements do not match a standard size,
- The opening is out of square by more than about 1/4 inch,
- Your home is older or historic, with a taller, narrower, or arched opening,
- You want a design scaled to your entryway.
Custom sizes are a regular part of what we do — every Chippendale door is made to order by hand in Virginia from Sapele wood, 1-1/8 inches thick, in 11 designs starting at $1,450, with glass and screen pane packages available so the door works as both a storm door and a screen door.
If your measurements are close but you are not sure, send them to us through our custom door size request page and we will tell you honestly whether a standard size will fit or a custom door is the right call.
